PiCapture › PiCapture SD1 incomptability issue through RTSP stream › Reply To: PiCapture SD1 incomptability issue through RTSP stream
You do not need any special driver to use PiCapture – it emulates the Raspberry Pi camera, and so anything that works with the RPi camera will work with the SD1. The most likely issue is that you are not configuring things on the RTSP side to match the “Mode 6” video. You mention that you have streaming working with the RPi camera, but you need to be certain that the resolution matches Mode 6 (640×480). If there is a mismatch, you will get errors such as what you are seeing.
The guide published Here is for an HD1 operating with “Mode 1” video, but could be a starting point. If you use Raspivid for the capture portion, then you know that any errors are after that step.