PiCapture Bypass video signal Reply To: Bypass video signal

#1579
mwlinder
Keymaster

The only output from the HD1 is to the RPi, and so you will need additional hardware if you want to view the video without using the “preview” on the RPi.

You should be able to use almost any HDMI splitter (or component splitter) to send the data to both the PiCapture board and to a monitor. That is how we have done our testing, and is helpful for tuning the color settings to get a closer match. The splitter acts as a “Y” so that each device gets its own video stream.

mwlinderReply To: Bypass video signal